Close

PTFE hoses

PTFE smooth hoses, PTFE corrugated hoses, PFA corrugated hoses

PTFE hoses are frequently used for applications with high heat and pressure requirements. They are available as smooth and corrugated hoses. The base hose is available in various PTFE grades.

The braiding material primarily consists of high-strength stainless steel wire, which is available in various grades. A two-layer braiding can enhance product safety and increase pressure resistance by approximately 30%. For applications with lower pressure requirements, softer stainless steel wire can be used.

Upon request, PTFE hoses can also be supplied in fixed lengths. Depending on the nominal diameter, lengths between 50 and 200 mm are available. The hoses are cut using an annealed cutting process, preventing the braiding from fraying and enabling efficient further processing.

High-pressure hose

Description
Smooth PTFE hose with single-layer braiding

Hose construction
Inner layer: PTFE tube smooth, natural
1st braided layer: stainless-steel wire (Niro) 1.4301 hard

PTFE smooth hose

Reference DN ID OD Burst pressure approx. Bending radius approx. Weight approx.
14160 03 - 1/8" 3,6 ±0,1 mm 6,7 ±0,15 mm 900 bar 50 mm 0,075 kg/m
13464 05 - 3/16" 5,0 ±0,2 mm 8,05 ±0,15 mm 800 bar 65 mm 0,101 kg/m
14811 06 - 1/4" 6,5 ±0,3 mm 9,2 ±0,3 mm 720 bar 80 mm 0,110 kg/m
14812 08 - 5/16" 7,9 ±0,3 mm 11,1 ±0,4 mm 675 bar 100 mm 0,150 kg/m
14813 10 - 3/8" 10,25 ±0,25 mm 13,1 ±0,4 mm 620 bar 130 mm 0,170 kg/m
14814 12 - 1/2" 12,7 ±0,4 mm 15,9 ±0,5 mm 500 bar 140 mm 0,244 kg/m
14872 16 - 5/8" 16,1 ±0,5 mm 19,0 ±0,5 mm 495 bar 170 mm 0,283 kg/m
14815 20 - 3/4" 19,3 ±0,5 mm 23,8 ±0,6 mm 405 bar 200 mm 0,450 kg/m
14873 25 - 1" 25,4 ±0,7 mm 30,2 ±1,2 mm 333 bar 300 mm 0,559 kg/m

Delivery program and data sheet

Dateigröße: 184 KB

PTFE smooth hose

PTFE hose with helical corrugation

Reference DN ID OD Burst pressure approx. Bending radius approx. Weight approx.
18447 08 - 5/16" 8,0 ±0,3 mm 13,0 ±0,5 mm 400 bar 20 mm 0,180 kg/m
18449 08 - 5/16" 8,4 ±0,3 mm 12,4 ±0,5 mm 414 bar 20 mm 0,187 kg/m
18451 10 - 3/8" 9,9 ±0,3 mm 14,8 ±0,6 mm 414 bar 20 mm 0,253 kg/m
16828 13 - 1/2" 12,6 ±0,3 mm 18,3 ±0,6 mm 310 bar 25 mm 0,296 kg/m
21120 Project 16 - 5/8" 15,5 ±0,3 mm 21,7 ±0,6 mm n.a. n.a. 0,412 kg/m
18455 16 - 5/8" 16,5 ±0,3 mm 21,5 ±0,6 mm 248 bar 51 mm 0,454 kg/m
18457 20 - 3/4" 19,6 ±0,5 mm 27,9 ±0,9 mm 207 bar 64 mm 0,462 kg/m
14249 25 - 1" 26,0 ±0,6 mm 35,8 ±0,9 mm 138 bar 89 mm 0,607 kg/m
21075 Project 32 - 1 1/4" 31,0 ±0,7 mm 38,5 ±1,0 mm n.a. n.a. 0,656 kg/m
18461 Project 32 - 1 1/4" 31,0 ±0,7 mm 43,1 ±0,9 mm n.a. n.a. n.a.
19344 32 - 1 1/4" 31,9 ±0,7 mm 41,3 ±1,0 mm 103 bar 125 mm 0,664 kg/m
21076 Project 32 - 1 1/2" 38,4 ±0,8 mm 46,3 ±1,2 mm n.a. n.a. n.a.
18463 32 - 1 1/2" 38,7 ±0,8 mm 53,3 ±1,2 mm 90 bar 152 mm 1,235 kg/m
21077 Project 50 - 2" 52,5 ±0,8 mm 59,6 ±1,6 mm n.a. n.a. 1,069 kg/m
18465 50 - 2" 49,0 ±1,0 mm 62,5 ±1,8 mm 69 bar 200 mm 1,652 kg/m

Delivery program and data sheet

Dateigröße: 229 KB

PTFE hose with helical corrugation

PFA hose with parallel corrugation

Reference ID OD Burst pressure approx. Bending radius approx. Coil length approx. Weight approx.
16290 7,0 ±0,3 mm 11,6 ±0,4 mm 360 bar 30 mm 50 m 0,136 kg/m
19411 8,7 ±0,3 mm 13,5 ±0,4 mm 280 bar 40 mm 50 m 0,149 kg/m
19414 9,8 ±0,3 mm 15,2 ±0,4 mm 260 bar 50 mm 50 m 0,193 kg/m
15495 12,3 ±0,4 mm 18,2 ±0,4 mm 240 bar 60 mm 50 m 0,248 kg/m
20505 13,5 ±0,4 mm 19,2 ±0,6 mm 240 bar 60 mm 50 m 0,249 kg/m
20226 15,6 ±0,5 mm 21,7 ±0,6 mm 220 bar 60 mm 50 m 0,319 kg/m
12387 16,4 ±0,5 mm 23,3 ±0,6 mm 200 bar 65 mm 50 m 0,340 kg/m
19410 18,2 ±0,5 mm 25,2 ±0,7 mm 180 bar 70 mm 50 m 0,312 kg/m
19645 19,7 ±0,6 mm 26,6 ±1,0 mm 150 bar 70 mm 50 m 0,426 kg/m
19408 23,8 ±0,6 mm 30,6 ±1,0 mm 100 bar 100 mm 50 m 0,485 kg/m
21122 Project 25,0 ±0,6 mm 32,2 ±1,0 mm 100 bar 100 mm 50 m 0,510 kg/m
15701 28,6 ±0,7 mm 35,6 ±1,0 mm 100 bar 100 mm 50 m 0,550 kg/m
12029 32,0 ±1,0 mm 41,1 ±1,0 mm 80 bar 120 mm 25 m 0,900 kg/m

Delivery program and data sheet

Dateigröße: 43 KB

PFA corrugated hoses